Alpine Exteriors is a licensed siding company (FL license RB29003900) working throughout Bayonet Point and the surrounding Pasco County communities along US-19. We install one product, and one product only: James Hardie fiber cement siding. We don't carry vinyl, we don't carry LP SmartSide or other engineered wood panels, and we won't quote a job with either. That's not a marketing line — it's how we've built our crews, our tooling, and our warranty process, and it's why homeowners in this part of Pasco County call us specifically for siding rather than a general contractor who does "a little bit of everything."
This page isn't a rundown of every siding material on the market. It's about what it's actually like to work with us: how we run a siding job in Bayonet Point from first call to final walkthrough, what our warranty covers and doesn't, and which neighborhoods we serve. If you already know you want James Hardie siding and you're trying to figure out who to hire, this is the page for you.
Fiber cement is cement, sand, and cellulose fiber pressed and cured into planks and panels. It doesn't warp in humidity, it doesn't feed termites, and it holds paint and factory finishes far longer than wood or vinyl in a climate like ours. James Hardie is the manufacturer we chose after comparing warranty structure, product consistency, and how well their HardieZone HZ10 formulation is engineered specifically for Gulf Coast humidity and heat — not a generic national blend.
When a company installs three or four different siding brands, warranty claims get complicated — was it a product defect or an installation error, and which manufacturer's process applies? Because we install only James Hardie, every job we do follows the same certified installation checklist, every crew member is trained on the same product, and every warranty claim runs through a single, well-documented process. There's no guesswork about which manual applies to your house.
We'll say this plainly: fiber cement costs more upfront than vinyl. We don't install vinyl because in our professional experience it performs poorly in intense Florida sun (it can warp and fade within a handful of years) and it doesn't hold up well to wind-driven debris in storm season. We'd rather turn away a budget-vinyl job than install a product we don't stand behind on a home in Bayonet Point.
Every siding project follows the same four stages. Homeowners tell us the biggest thing they appreciate is knowing what happens next — there's no guessing at where the job stands.
We walk the exterior with you, check for existing moisture damage, rot, or soft sheathing behind the current siding, and measure the full elevation. You get a written, itemized estimate — not a verbal ballpark — that spells out material, labor, tear-off, and any carpentry repair separately.
Old siding comes off down to the sheathing. This is the step some contractors rush or skip, but it's the one that matters most: any water-damaged sheathing or framing gets identified and repaired before a single new board goes up. We install a weather-resistant barrier per James Hardie's published installation instructions, which is also what keeps your product warranty intact.
HardiePlank lap siding, HardiePanel vertical siding, or a combination with HardieTrim accent boards goes up per Hardie's fastening and clearance specs — correct nail pattern, correct ground clearance, correct caulking at joints and penetrations. Sloppy installation is the single biggest cause of premature siding failure, regardless of brand, so this stage is where our crew's certification actually shows.
We walk the finished exterior with you, point out anything you should know for long-term care, and haul away all debris and old siding. You're not left with a dumpster in the driveway for a week.
Bayonet Point sits in unincorporated Pasco County, just inland from the Gulf of Mexico along the canal network that feeds toward the Anclote River and Gulf Harbors. That geography matters for siding decisions in a few specific ways. Homes closer to the canals deal with near-constant humidity and a faint salt influence carried in on Gulf breezes, even though you're not on open beachfront. Homes further inland toward US-19 deal less with salt but just as much with the region's relentless summer sun and afternoon thunderstorm cycle.
A lot of the housing stock here dates to the 1970s through 1990s ranch-style building boom, and much of it went up with the original wood or early-generation siding of that era — materials that were never designed for 50 years of Florida humidity cycling. If your siding is original to a home from that period, it's very likely past the point where patching makes sense.
Hurricane season runs June through November, and Pasco County sees its share of wind-driven rain events even in years without a direct hurricane strike. Siding that's properly fastened and sealed at the joints does real work keeping wind-driven moisture out of your wall cavity — this isn't a cosmetic upgrade, it's part of your home's weather envelope.
"Warranty" gets used loosely in this trade. We keep ours specific and in writing, and we make sure you understand the difference between the two warranties that apply to your job.
| Warranty | Who Backs It | What It Covers |
|---|---|---|
| James Hardie Product Warranty | James Hardie (manufacturer) | Non-prorated limited warranty against manufacturing defects in the siding material itself |
| ColorPlus Technology Finish Warranty | James Hardie (manufacturer) | Covers factory-applied finish against peeling, cracking, and fading, separate from the product warranty |
| Alpine Exteriors Workmanship Warranty | Alpine Exteriors (installer) | Covers our installation labor — fastening, flashing, and sealing performed by our crew |
Most siding failures we get called out to inspect on older jobs — anywhere in Florida — trace back to installation, not the material. That's exactly why the workmanship warranty and the manufacturer warranty are two separate things, and why we walk every homeowner through both before we start.
Bayonet Point is our home base for this part of Pasco County, and we run regular crews throughout the surrounding communities without a special trip charge for standard service radius. That includes:
If you're just outside this list, ask us — we can generally still schedule your estimate.
No two houses cost the same to re-side, and we'd rather explain why upfront than hand you a number with no context. Here's what actually moves the estimate up or down.
| Factor | Why It Matters |
|---|---|
| Home size & elevation count | More square footage and more wall faces mean more material and labor hours |
| Existing siding condition | Rotted sheathing found during tear-off requires carpentry repair before installation continues |
| Number of stories | Two-story elevations require staging and scaffolding, which adds labor time |
| Trim and accent detail | HardieTrim boards, window/door casing, and architectural detail add material and install time |
| Access around the home | Fencing, landscaping, pools, and canal-side setbacks affect how crews stage material |
A typical single-story home in Bayonet Point runs a few weeks from tear-off to final walkthrough, weather permitting — Florida's summer storm pattern can push a schedule by a day or two here and there, and we'll tell you honestly if that's happening rather than let a timeline go quiet.
Not sure if you need a repair or a full re-side? These are the signs worth getting looked at:
Alpine Exteriors holds Florida license RB29003900 and carries the insurance coverage required to work on Bayonet Point homes. We're not a subcontracted crew working under someone else's license or a lead-generation outfit that hands your job to the lowest bidder — the estimate you get is from the company that does the work.
If you're weighing a siding project for your Bayonet Point home, we're glad to walk the exterior with you and give you a straight, written estimate with no pressure to sign on the spot. Use the form below to request a free estimate.
For a single-story Bayonet Point home, most jobs run a few weeks from tear-off to final walkthrough. Two-story homes, extensive trim work, or sheathing repair discovered during tear-off can extend that timeline. Florida's summer storm pattern can also add scheduling days, which we'll communicate honestly as they come up.
Ask for their state license number, proof of insurance, and a written itemized estimate rather than a verbal number. Also ask specifically what brand of siding they install and whether their crew is manufacturer-certified for that product, since installation quality affects your warranty coverage as much as the material does.
HardiePlank is horizontal lap siding, the traditional clapboard look most homes in this area use. HardiePanel is a vertical sheet product, often used for accent walls, gables, or a more modern architectural style. Both are James Hardie fiber cement, just different profiles for different aesthetic goals.
Siding with factory-applied ColorPlus finish is designed to resist fading and typically doesn't need repainting for many years, well beyond standard field-applied paint. Primed Hardie siding that's field-painted follows a normal repaint schedule similar to other exterior surfaces, depending on sun exposure and color choice.
Properly fastened, correctly flashed siding is part of your home's weather envelope, and it plays a real role in keeping wind-driven rain out of your wall cavity during tropical storms and hurricanes. It's not a substitute for structural storm prep like impact windows or a wind-rated roof, but it's not just cosmetic either — sealed, well-installed siding measurably reduces moisture intrusion risk during wind-driven rain events.