Hudson sits on the Gulf side of Pasco County, which means the contractor you hire for your siding project is working against a different set of conditions than a crew inland in Orlando or up in Ocala. Salt air off the Gulf, high year-round humidity, and a real hurricane season all put pressure on exterior materials and on the installation itself. Alpine Exteriors is licensed in Florida under RB29003900, and we install siding for a living in this exact climate — not as a side offering tacked onto a general remodeling business.
This page is about us as a contractor: how we work, what our warranty actually covers, where we service, and what a project with our crew looks like from the first phone call to the final walkthrough. If you're trying to understand why we recommend James Hardie fiber cement specifically, or want a deeper technical breakdown of the material itself, that's covered elsewhere on our site — here we're focused on the contractor relationship, because that's usually the harder thing for a homeowner to evaluate.
Hudson's housing stock is a mix: canal-front and waterfront homes near Hudson Beach and the Gulf, older ranch-style houses built in the 1970s and 1980s further inland, and newer construction in subdivisions off US-19. A lot of that older stock is now due for a siding replacement, and the homes closest to the water have had decades of salt-laden air working on whatever's on the walls. That combination — older substrate, coastal exposure, and a six-month storm season from June through November — means installation details matter more here than in a drier, inland market.
A siding job that looks fine going up but has skipped flashing details, wrong fastener spacing, or gaps at penetrations will show its problems in Hudson faster than almost anywhere else in the state. Wind-driven rain during a tropical storm finds every shortcut. That's the core reason we treat the installation crew and the process as the product, not just the siding panels themselves.
We start with an on-site walkthrough of your home's exterior, not a phone estimate. We're looking at the current siding condition, the substrate underneath where it's accessible, trim and soffit condition, window and door flashing, and any moisture damage that needs to be addressed before new siding goes up. You get a written estimate based on what we actually find, not a generic per-square-foot guess.
Because we install James Hardie exclusively, this step is simpler than it is with contractors juggling multiple product lines. We'll walk you through profile options (lap siding, shingle-style panels, or board and batten), color options in Hardie's factory-applied ColorPlus finishes, and where trim and accent choices make sense for your home's style.
Most single-family Hudson homes run somewhere between one and two weeks for a full siding replacement, depending on square footage, the amount of substrate repair needed, and weather. During hurricane season we build extra buffer into every schedule and stay in direct contact if a storm system is tracking toward the Gulf — we're not going to leave a house partially open in front of a named storm.
Every project ends with a walkthrough where we go over the finished work with you directly, not just a foreman signing off internally. Job site debris, old siding, and packaging are hauled off daily during the project, not left to pile up until the end.
We made a deliberate decision years ago to specialize in one product line rather than offer vinyl, LP SmartSide, or other engineered wood options. That's a business choice we stand behind for reasons specific to what we see in this climate: vinyl siding softens, warps, and fades faster under sustained Gulf Coast sun and heat, and it doesn't hold paint if a homeowner ever wants to change color. Engineered wood products carry moisture-sensitivity trade-offs that concern us in a humid coastal environment with a long wet season.
Fiber cement, by contrast, is dimensionally stable in heat and humidity, holds a factory finish for a long service life, and doesn't provide the fuel or the moisture pathway that wood-based products can in this kind of climate. Specializing in one product also means our crews aren't relearning installation details across different systems — they install Hardie products daily and know the manufacturer's fastening, flashing, and clearance requirements cold.
Two separate warranties apply to a Hardie siding project, and homeowners are often unclear on the difference. One covers the product itself and comes from the manufacturer. The other covers our installation labor and comes from us. Both matter, and neither one replaces the other.
| Coverage | Who Backs It | What It Covers |
|---|---|---|
| Manufacturer product warranty | James Hardie | Defects in the siding material itself, including the ColorPlus factory finish where applicable |
| Alpine installation warranty | Alpine Exteriors | Workmanship — flashing, fastening, sealing, and general installation quality |
| Transferability | Varies by warranty | Manufacturer terms and our workmanship terms are both spelled out in writing at contract signing, including what transfers if you sell the home |
We give you the specific written terms for both warranties before work begins, not a verbal summary. If something goes wrong after the project is complete, you should know exactly which warranty applies and who to call.
Hudson is our home base for siding work along this stretch of the Gulf, and we regularly work in the neighborhoods around Hudson Beach, the canal communities off Old Dixie Highway, and the inland subdivisions closer to US-19 and Little Road. We also serve nearby Pasco County communities including Bayonet Point, Port Richey, and New Port Richey. If you're just outside those areas, ask — we can usually still schedule an estimate.
If you have an HOA, we're used to submitting for architectural approval where required — ask us early so that step doesn't hold up your schedule.
Whether or not you end up hiring us, a few questions will tell you a lot about who you're dealing with. Ask to see the contractor's Florida license number directly, not just a company name on a truck. Ask whether the crew doing the actual installation are employees or subcontracted out, and how long that crew has worked together. Ask what happens if hidden water damage is found once old siding comes off, and get that answer in writing. A contractor who answers these plainly, before you sign anything, is generally the one worth hiring.
If you're ready to talk through a siding project for your Hudson home, or just want a straight answer on what it would cost, fill out the form below for a free, no-pressure estimate. We'll walk your property in person and give you a real number based on what's actually there.
A dedicated siding contractor like Alpine focuses installation crews and scheduling on one trade, which typically means faster turnaround and crews with deeper product-specific experience. A general contractor may sub the siding work out to a company like ours anyway, so going direct can simplify communication and remove a markup layer.
You can look up any Florida contractor's license number, including RB29003900, through the Florida Department of Business and Professional Regulation's public license search. Confirm the license is active, matches the business name on your contract, and check for any disciplinary history before signing.
No. We've made a deliberate decision to specialize in James Hardie fiber cement only, because it's the product we believe holds up best in this climate and the one our crews are trained on daily. If vinyl is what you're set on, we're not the right contractor for that particular job.
HardiePlank is the traditional horizontal lap look most common on Hudson's ranch-style and waterfront homes, installed board by board with overlapping courses. HardiePanel is a larger vertical sheet product often used for board-and-batten styling or accent sections, and it goes up faster but suits a different architectural look.
We build extra time into every summer and fall schedule and monitor tropical systems tracking toward the Gulf throughout a project. If a storm is approaching, we won't leave a house with siding partially removed, and we'll secure the site and reschedule around the storm rather than rush the work.